Projector & Projection Screen Install in
Oklahoma City, OK —
Mounting, Screens & Image Alignment
We install projectors and projection screens across Oklahoma City, OK, from ceiling-mounted conference room projectors and motorized screens to ultra-short-throw classroom units and large-venue laser projectors, with every image sized, focused and aligned to the screen.
Need a projector installed or upgraded? Schedule a site visit.
How we install your projector and screen
A sharp, bright image starts with the math. We measure the room, the distance to the farthest seat and how much daylight comes in, then size the screen and choose a projector with the right brightness and throw ratio, which is the distance from the projector to the screen divided by the image width. That tells us exactly where the projector has to hang.
Next we mount everything securely. Projectors go on ceiling mounts fastened to the structure above the ceiling, not just the ceiling tile, with a safety cable as backup. Screens are wall-mounted, ceiling-hung or recessed into the ceiling, and we run HDMI or HDBaseT, power and screen control wiring out of sight.
Finally we align the image. Instead of relying on digital keystone, which softens the picture, we position the projector and use lens shift so the image lands square on the screen. Then we set focus, picture mode and brightness, connect it to your control system and show your team how to use it.
Projector and screen installs we handle
New installs, replacements and upgrades in rooms of every size, including:
- Conference room and boardroom projectors
- Classroom and lecture hall projection
- Auditoriums and performing arts spaces
- Church sanctuaries and worship spaces
- Training rooms and divisible ballrooms
- Gyms and multipurpose rooms
- Ultra-short-throw projectors for interactive boards
- Motorized and ceiling-recessed screens
- Fixed-frame and tab-tensioned screens
- Ambient light rejecting (ALR) screens for bright rooms
- Edge-blended, extra-wide images from two or more projectors
- Lamp-to-laser projector upgrades and replacements
Projector types compared
The right projector depends on how far it can sit from the screen and how big and bright the image needs to be. Here’s how the four main types compare.
| Specification | Standard throw | Short throw | Ultra-short throw | Large-venue laser |
|---|---|---|---|---|
| Throw ratio | About 1.2–2.0:1 | About 0.5–0.8:1 | Under 0.4:1 | Interchangeable lenses, short to long |
| Typical brightness | 3,500–6,000 lumens | 3,000–5,000 lumens | 3,000–5,000 lumens | 10,000–30,000+ lumens |
| Typical image size | 80″–200″ | 80″–150″ | 70″–120″ | 150″ and up |
| Mounting | Ceiling mount mid-room | Ceiling mount near the screen | Wall arm or table, right at the screen | Structural mount or rigging |
| Shadows on screen | Possible if people walk in front | Fewer | Almost none | Mounted high, out of the way |
| Best for | Conference rooms and classrooms | Small rooms and training spaces | Interactive boards and tight rooms | Auditoriums, churches and ballrooms |
From ceiling mounts to screen surfaces
A good projection system depends on more than the projector. These are the four pieces we get right on every install.
Mounts and structure
Projector mounts attach to the building structure with threaded rod, strut or a reinforced plate, never to ceiling tile alone. Every projector gets a safety cable, and we keep the mount rigid so the image doesn’t wobble when doors close.
Screens and surfaces
Choosing a screen means picking the size, aspect ratio (usually 16:9 or 16:10), and surface. Matte white works in dark rooms, while ambient light rejecting (ALR) screens keep contrast in rooms with windows. Motorized screens roll away when not in use.
Laser and lamp projectors
Laser projectors reach roughly 20,000 hours before dimming to half brightness, while lamp projectors typically need a new lamp every 3,000–5,000 hours. Upgrading to laser removes lamp changes and keeps brightness and color steadier over the years.
Alignment and control
We align each image with lens shift and focus, and for wide screens we edge blend two or more projectors into one seamless picture. Projectors and motorized screens connect to your control system so one button lowers the screen and turns everything on.
Projector projects across Oklahoma City
Churches, schools, hotels and attractions all use projection differently. These are the kinds of installs we plan for here.
Church sanctuaries
Churches across the metro use bright laser projectors and large screens for lyrics, sermons and video, often with side screens so every seat in a wide sanctuary has a clear view.
Classroom upgrades
Schools and colleges around Oklahoma City replace aging lamp projectors with laser or ultra-short-throw units that cut maintenance and stop teachers from casting shadows on the board.
Hotel ballrooms and meeting rooms
Hotels near the convention center install motorized screens and high-brightness projectors in divisible ballrooms, so each section can run its own presentation.
Museums and attractions
Museums and attractions in northeast Oklahoma City use edge-blended projection for wide, immersive exhibits that a single screen can’t cover.
Projector installs, captioned
The main parts of a projection install, with the details that matter for each.
Ready for a brighter, sharper picture? Talk to an Oklahoma City projector installer today.
Contact our Oklahoma City projector installers
Video Wall Installation Oklahoma City, OK 142 SW 134th St, Oklahoma City, OK 73170Phone: (405) 289-8491
Email: [email protected]
To get an accurate quote faster, have these ready when you reach out:
- Room size, ceiling height and a photo of the screen wall
- Distance from the screen to the farthest seat
- How bright the room is: windows, skylights and lighting
- Your target install date