Digital Signage in
Oklahoma City, OK —
Screens, Media Players & Content Setup
We install and configure commercial digital signage across Oklahoma City, OK, from wall-mounted lobby screens and digital menu boards to wayfinding kiosks, with media players, content scheduling and network cabling set up so your screens run on their own.
Planning new screens? Schedule a site survey.
How we install and set up digital signage
A good signage install starts with where people will actually look. We walk the space with you, check sight lines and viewing distances, and pick screen sizes, heights and orientations that fit how customers or staff move through it. Then we confirm the wall can carry the load and plan backing or ceiling supports before anything is mounted.
Next we run power and data. Every screen gets a dedicated outlet behind it and a wired Cat6 connection where possible, since a hardwired player is far more reliable than one fighting for Wi-Fi. Cables are hidden inside the wall or in low-profile raceway, so the finished install looks clean.
Once displays are mounted and leveled, we connect and register each media player, load it into your content management system and build the first playlists and schedules. Before we leave, we show your team how to change content, so updating a menu or a lobby message takes minutes, not a service call.
Digital signage we install and configure
Single screens, multi-location networks or a refresh of displays you already own, our installers handle these setups:
- Digital menu boards for restaurants, cafés and drive-thrus
- Lobby and welcome screens for offices and hotels
- Wayfinding and building directory displays
- Interactive touchscreen kiosks
- High-brightness retail window displays
- Ceiling-hung and back-to-back double-sided screens
- Waiting room and queue management screens
- Corporate communications and KPI dashboards
- Meeting room and event schedule displays
- School, campus and church announcement screens
- Outdoor and weather-rated signage
- Media player replacement and CMS migration
Digital signage display specifications
The right screen depends on where it hangs and how long it runs each day. Here’s how the four most common signage displays compare.
| Specification | Indoor commercial display | Window-facing display | Touchscreen kiosk | Outdoor display |
|---|---|---|---|---|
| Common sizes | 43″–75″ | 49″–75″ | 32″–55″ | 55″–75″, or modular LED |
| Typical brightness | 350–700 nits | 2,500–3,500 nits | 350–500 nits | 2,500–5,000+ nits |
| Duty cycle | 16/7 or 24/7 rated | 24/7 rated | 16/7 or 24/7 rated | 24/7 rated |
| Mounting | Flush, tilt, portrait or ceiling-hung | Ceiling-hung or floor stand, facing the glass | Freestanding or wall-mounted enclosure | Weather-rated enclosure, pole or wall structure |
| Connectivity | Wired Cat6 to media player or built-in system-on-chip | Wired Cat6, player behind display | Built-in PC or player with touch over USB | Fiber or Cat6 to an in-enclosure player |
| Best used for | Menus, lobbies, dashboards | Storefronts in direct sun | Directories, check-in, ordering | Drive-thrus, entrances, events |
From mounting to media players and content scheduling
Digital signage is part hardware, part software. These are the four pieces every installation brings together.
Display mounting
Mounting a sign screen is different from hanging a TV at home. Commercial installs call for portrait mounts for menu boards, ceiling-hung mounts for airports and retail, recessed mounting for corridors where screens can’t stick out, and tamper-resistant hardware in public spaces.
Media players
The media player is the brain behind each screen. We install it out of sight behind the display or in a nearby rack, connect it over HDMI, and configure power schedules so screens turn on before opening and off after close without anyone touching a remote.
Content management and scheduling
Configuring your CMS is what turns screens into signage. We set up playlists, dayparting so breakfast items show in the morning and dinner at night, zones for multi-location networks, and override messages you can push to every screen in an emergency.
Network and power
Connecting players reliably means wired Cat6 wherever we can run it, PoE for kiosks and small displays that support it, and dedicated circuits behind larger screens. We label and document every run so your IT team knows exactly where each sign connects.
Digital signage projects across Oklahoma City
Restaurants, retail, healthcare and the downtown event scene all use screens differently. These are the kinds of signage installs we plan for here.
Restaurant menu boards
Restaurants and bars near the Bricktown Canal and along Midtown’s dining strip replace printed menus with portrait menu boards that switch automatically between lunch, happy hour and game-day specials.
Retail window displays
Boutiques around Penn Square Mall and Classen Curve use high-brightness, window-facing displays that stay readable in the afternoon Oklahoma sun and draw shoppers in from the sidewalk.
Event and hotel wayfinding
Hotels and venues near the Oklahoma City Convention Center use directory screens and room-schedule displays to route conference crowds, with content updated daily from one CMS.
Healthcare lobbies and waiting rooms
Clinics and medical offices in the health district use check-in kiosks, queue displays and waiting room screens that cut front-desk questions and keep patient messaging current.
Digital signage installs, captioned
Each type of sign we install, with the details that matter for that setup.
Ready to put up new screens? Talk to an Oklahoma City signage installer today.
Contact our Oklahoma City digital signage installers
Video Wall Installation Oklahoma City, OK 142 SW 134th St, Oklahoma City, OK 73170Phone: (405) 289-8491
Email: [email protected]
To get an accurate quote faster, have these ready when you reach out:
- Wall width and height, plus a photo of the space
- Wall type: drywall over studs, masonry or concrete
- Number of screens and what you want them to show
- Your target install date